focusing
WEP08
The project of Kirkpatrick – Baez focusing system for beam diagnostics on the SKIF
262
The Siberian Ring Radiation Source (SKIF) is an upcoming 4th-generation SR source under construction in Novosibirsk, Russia. The designed beam emittance for SKIF is 75 pm-rad, which corresponds to a beam size of 6 micrometers at the observation point within the dipole magnet. The transverse beam dimensions are essential parameters for tuning and reliable operation of the facility. The SKIF diagnostic suite includes a double-slit interferometer operating in the ultraviolet region of the spectrum. This device's spatial resolution should be sufficient to measure the radial size of the beam to an accuracy of 10 percent. These diagnostics will be used during the commissioning of SKIF and afterwards. Although an additional source of information on beam dimensions and dynamics would be desirable for assurance, taking into account the record designed value of beam emittance. The application of X-ray optics and the Kirkpatrick-Baez focusing system seem to be the most suitable options. The article discusses the project of this system, which will acquire X-rays from a SKIF dipole magnet. Simulations of the heat load on the mirrors, means of compensation of thermo-induced surface distortion (thermo-bump) and the spatial resolution of the KB system are described. The choice of scintillator screens, expected temporal resolution, and sensitivity of the diagnostics are discussed as well.
  • O. Meshkov, D. Reshetov, V. Dorokhov
    Budker Institute of Nuclear Physics
  • E. Glushkov, I. Malyshev
    Institute of Applied Physics
Paper: WEP08
DOI: reference for this paper: 10.18429/JACoW-IBIC2024-WEP08
About:  Received: 04 Sep 2024 — Revised: 09 Sep 2024 — Accepted: 10 Sep 2024 — Issue date: 18 Dec 2024
Cite: reference for this paper using: BibTeX, LaTeX, Text/Word, RIS, EndNote
WEP14
Bunch resolved transverse beam diagnostics at BESSY II
284
For diagnostics of the different bunch types at the BESSY II electron-storage ring, a streak camera and a fast-gated ICCD camera have been installed at two neighbouring beamlines*, both of which are powered by visible light from the same dipole magnet. This contribution is focused on the ICCD camera and its first applications. After an improvement regarding the ICCD repetition rate, the maximum illumination rate exceeds now the BESSY II revolution frequency of 1.25 MHz. Furthermore, we have improved the optical light-transfer system and characterized the optical magnification, the spatial resolution and time resolution of the system. Initial measurements have been restricted to direct bunch-resolved imaging of the 2-dimensional transverse shapes of different types of bunches. Specifically, the Pulse Picking by Resonant Excitation (PPRE\**) bunch is investigated in more detail. This bunch is horizontally broadened by a quasi-resonant incoherent perturbation *\*\* and leads to pseudo single-bunch radiation within the complex multi-bunch fill-pattern at the BESSY II storage ring.
  • I. Shmidt
    Helmholtz-Zentrum Berlin fuer Materialien und Energie GmbH
  • G. Schiwietz, G. Rehm
    Helmholtz-Zentrum Berlin für Materialien und Energie
Paper: WEP14
DOI: reference for this paper: 10.18429/JACoW-IBIC2024-WEP14
About:  Received: 05 Sep 2024 — Revised: 09 Sep 2024 — Accepted: 12 Sep 2024 — Issue date: 18 Dec 2024
Cite: reference for this paper using: BibTeX, LaTeX, Text/Word, RIS, EndNote
THP73
Methodology for identifying the centre of a solenoid magnet based on the beam dynamics
649
The method of varying the strength of the corrector magnet installed upstream and minimising the position variation in diagnostics located downstream is widely used for identifying the centre of the magnetic field produced by a quadrupole magnet. However, in the case of a solenoid magnet, unlike a quadrupole magnet, it is not suitable to apply the variable separation method in the x-y direction since both field components are correlated, and the focusing of the magnetic field occurs in the azimuthal direction. In this presentation, we propose an analytical method for finding the centre of a solenoid magnet and present results validated by simulations.
  • D. Kim
    Gangneung-Wonju National University
  • J. Hwang
    Helmholtz-Zentrum Berlin für Materialien und Energie GmbH
Paper: THP73
DOI: reference for this paper: 10.18429/JACoW-IBIC2024-THP73
About:  Received: 05 Sep 2024 — Revised: 11 Sep 2024 — Accepted: 12 Sep 2024 — Issue date: 18 Dec 2024
Cite: reference for this paper using: BibTeX, LaTeX, Text/Word, RIS, EndNote