A 100-MeV proton linac has been operated for over 10 years at KOMAC and used for proton beam services. We are planning to upgrade the linac energy to 200-MeV. By increasing the linac beam energy, we expect the machine to be capable of serving wider application fields including space radiation tests of semiconductor devices and material tests by using high-energy neutrons generated by bombarding a proton beam to a solid target. For the energy upgrade, we consider the SDTL structure for the 200-MeV section. The structure of SDTL is relatively simple so we may reduce the risk and time of development. In addition, we can avoid complex cryogenic systems by choosing a normal conducting approach. For the beamline, two separate target rooms (one for proton, and the other for proton and neutron irradiation) are under design. Details of the planning activity for the KOMAC linac upgrade will be reported in this presentation.

Accelerator-based boron neutron capture therapy (BNCT) has been studied worldwide for a novel cancer therapy using neutrons generated by an accelerator system. The iBNCT (Ibaraki BNCT) project began in collaboration with KEK, the University of Tsukuba, Ibaraki Prefecture, and private companies in Japan. The iBNCT project aims to realize linac-based BNCT with a compact and low-activation accelerator system based on the design and experiences of the J-PARC linac. It consists of an H+ ECR ion source, a 3-MeV RFQ, an 8-MeV Alvarez-DTL, and a beryllium neutron-generation target. Since a high neutron flux is required for the BNCT treatment, an average beam current of more than 1 mA is necessary with the combination of the 8-MeV proton and the beryllium target. By improving the vacuum, cooling water and low-level RF system, stable operation was achieved with an average beam current of 2 mA. After completion of the non-clinical studies in parallel with neutron beam characteristic measurements, the iBNCT project has started a clinical study in January 2024. In this contribution, the present status together with the conducted upgrade and prospects of the iBNCT accelerator will be presented.

In the coming decades, numerous designs for new accelerator-based facilities, or potential upgrades to current facilities, have been proposed to support the next generation of scientific advancement. While these facilities have significant scientific, economic, and societal benefits, they also require considerable resources to operate effectively. Amid the ongoing climate crisis, these facilities face the challenge of balancing the need for increased scientific output, size, and/or power with the global need to reduce resource consumption. This challenge presents a unique opportunity to integrate innovative environmental impact reduction techniques into their design. The presented living document offers high-level guidelines to enhance environmental sustainability across the planning, construction, operation, and decommissioning stages of large accelerator facilities. It consolidates various resources and highlights both existing and proposed practices to inspire more sustainable approaches.

A high-power 3-GeV proton beam from a rapid cycling synchrotron (RCS) is transported to targets for muon and neutron production at Materials and Life Science Experimental Facility (MLF) by a 3-GeV RCS to Neutron facility Beam Transport (3NBT) line in J-PARC. Recently, the design power of 1 MW has been achieved, which has initiated a future plan of MLF second target station (TS2). For the future plan, design studies have been started for a new beam transport line to the TS2 target, which works as a source for both muon and neutron. In this study, 3-GeV proton beam transport is simulated in the vicinity of the TS2 target, where a bending magnet for muon separation and a capture solenoid are aligned. In this presentation, we report magnetic field effects on the proton beam brought by those magnets and correction of the effects.

The National Atomic Research Institute (NARI) is developing a 70 MeV proton cyclotron, with construction set from 2023 to 2027. The cyclotron is designed to operate at proton energies from 28 to 70 MeV and a maximum current of 1000 micro-amperes. It will serve three main purposes: (1) medical isotope production, (2) proton irradiation testing, and (3) cyclotron-based neutron source development. NARI aims to ensure a stable supply of radioisotopes for nuclear medicine, such as Tl-201, I-123, and Ga-67, while advancing the development of isotopes like Cu-67 and Mo-99. In addition to medical uses, the cyclotron will simulate space radiation environments for aerospace materials testing and radiation measurement standards. The cyclotron will also support neutron-based technologies, benefiting nuclear physics, new materials, and industrial applications. Neutron research will occur in two phases: Phase I (2023–2026) will establish a thermal neutron target station for neutron diffraction studies, and Phase II (2027–2030) will develop a quasi-monoenergetic neutron (QMN) source for soft error rate testing in electronics and a high-resolution neutron imaging station. Expected to be fully operational by 2028, the facility will include seven beamlines, two solid target stations, one gas target station, and specialized laboratories for proton, fast neutron, and thermal neutron research. The NARI 70 MeV cyclotron will support both routine isotope production and advanced scientific research.

The high current density of HTS material allows electromagnet to induce sufficiently strong magnetic field without relying on any iron core. This permits the design of air-cored cyclotron, where the absence of iron core brings the properties of light-weight and high field reproducibility, making it an ideal medical cyclotron to be installed inside hospitals. However, the cyclotron coil system need to induce highly accurate field while satisfying the engineering restriction from the HTS coil. Compact size, small fringe field and minimum fabrication cost are also desirable at the same time. A HTS coil system of air-cored cyclotron is designed with the above restrictions taken into consideration. Multiple beam type accelerations that are required for medical RI production are simulated, in order to verify the usefulness of this design. In this work, the coil system design, the magnetic field and the HTS coil properties are presented. The feasibility of actual fabrication and in-hospital installation is discussed.

The Institute for Plasma Research in India set up an accelerator-based 14 MeV neutron generator utilizing Electron Cyclotron Resonance Ion Source technology. This advanced generator can produce 1012 neutrons per second in continuous and pulse modes. By directing deuterons at a TiT target, it generates fast neutrons that are essential for various applications such as fusion experiments, electronics testing, feasibility studies of medical isotope production, neutron radiography, etc. Various independent neutron diagnostics such as diamond detectors, proportional counters, and foil activation have been installed in the Neutron Generator. These techniques provide precise measurements of neutron flux, which are cross-checked with the associated alpha diagnostic technique to ensure accuracy. Additionally, lab-scale experiments at IPR have explored neutron irradiation for medical radioisotope production and radiation-induced damage in electronic components. This paper highlights the significance of precise measurement techniques and demonstrates the critical role of neutron generators in advancing research and practical applications, from medical isotopes to fusion neutronics studies.

The Frankfurt Neutron Source FRANZ will be a compact accelerator driven neutron source utilizing the 7Li(p,n)7Be reaction with a 2 MeV proton beam. The 700 keV RFQ has been sucessfully commissioned with a 10 mA proton beam. Conditioning of the subsequent IH-type cavity has been performed up to 10 kW. We also report on RFQ emittance measurements performed with a slit grid emittance device. In addition, a fast faraday cup (FFC) was used for bunch shape measurements behind the RFQ.

Accelerator-driven systems (ADSs) can accelerate high intensity ions to generate high flux of neutrons to transmute the long-lived species in used nuclear fuel (UNF) from nuclear reactors. A typical specification would be for a 1-2 GeV proton beam, comprising multi-MW-level power load on a spallation target. An alternative approach could be to produce the neutrons via breakup of 40-MeV deuterons on a low-Z target. For this purpose, an innovative deuteron cyclotron auto-resonance accelerator dCARA is described here. It is predicted to produce a 40-MeV, 125 mA CW deuteron beam, with notable features including continuous acceleration without bunching for good beam stability, high efficiency, wide beam aperture, and an exceptionally short length of 1.6 meters. It is estimated that 5-10 smaller ADS dCARA-based modules could provide the same level of transmutation as one ADS employing a GeV-level 25-MW linac. Other applications of dCARA include medical isotope production system, or fusion prototypic neutron source for testing inner-wall materials for a future fusion power reactor.

IFMIF-DONES is devoted to the irradiation of fusion materials, based on a high energy linear accelerator and a lithium-deuteron stripping reaction, creating the high intensity neutron source which simulates the damage on the 1st wall of the future fusion reactors. The core of the facility are the Accelerator, Lithium and Test Systems hosted inside IFMIF-DONES Facility, in the so-called Main Building (MB). The detailed design of this building was initiated first during the IFMIF-EVEDA activities in the framework of the Broader Approach (EU-Japan Bilateral Agreement) and pursued within EUROfusion for the development of an Early Neutron Source (WPENS). The design has evolved in which the main areas in terms of neutronics shielding are the Accelerator Vault and the Test Cell, where the nuclear reaction takes place and the materials are irradiated. Additional rooms like the Access Cell or the radwaste treatment area, are key in terms of shielding. In this work, it is presented the status of the integration into the design of the MB structure of the safety requirements from the definition of the radiation maps, neutronics studies and heavy concrete vs ordinary concrete capabilities.

We conducted time-of-flight (TOF) measurements to characterize the spectrum of a quasi-monoenergetic neutron beam driven by a 30-MeV proton cyclotron at the National Atomic Research Institute in Taiwan*. Neutrons were produced by irradiating 30-MeV protons onto a 1-mm-thick beryllium target. The developed TOF spectrometer comprised two 2-inch EJ-309 organic scintillators positioned 200 mm from the neutron beam port to detect gamma rays emitted from the target, and a 3-inch EJ-309 scintillator placed at a flight distance of 2940 mm to measure neutrons. As the signals of gamma-ray bursts triggered TOF measurements at an RF frequency of 73.13 MHz, repetitive distributions of coincidence events between gamma-ray and neutron-related signals were observed, resulting in an effective time window of 13.67 ns for measuring neutrons in the energy range of 16.19–30 MeV. The measured neutron spectrum exhibited a peak at 26 MeV, verifying the simulated spectrum obtained from an MCNP Monte Carlo model. Additionally, we developed a fast-timing scintillator module that measured the proton bunch duration as 0.97 ns, enabling accurate estimation of the energy resolution of the neutron spectrum.

Fixed Field Alternating gradient accelerators (FFA) hold promise for pulsed high intensity applications. No such FFA has been constructed to date; therefore a prototype - the Front End Test Stand-FFA (FETS-FFA) has been pro- posed to explore the feasibility of using FFA technology for the next generation spallation neutron source, ISIS-II. A key component of this prototype is its main magnets, which must meet several critical requirements: maintaining zero chro- maticity during acceleration, offering tune point flexibility, and providing a large dynamic aperture. The selected lattice incorporates a doublet spiral magnet design for more flexi- ble operations in the tune space. The magnetic field profile is generated by distributed conductors wound over the pole face; a 3D analysis using OPERA software was conducted to evaluate the settings necessary to produce the desired field. The cell tune variation was found to be within ±0.0015 hor- izontally and ±0.002 vertically, for four different working tune points.

The European Spallation Source - ESS, has achieved its major construction in Lund, Sweden and is currently continuing in parallel the commissioning of its first systems. ESS aims to install and commission the most powerful proton LINear ACcelerator (LINAC) designed for neutron production and a 5MW Target system for the production of pulsed neutrons from spallation. In support of this ambitious goal, the Mechanical Measurements Lab (MML) at ESS provides an array of investigative solutions such as Resonant Ultrasound Spectroscopy (RUS), Transient Grating Spectroscopy (TGS), Modal Analysis, Structural Health Monitoring (SHM), Strain and Stress Analysis and Destructive Testing, guaranteeing full support to all the groups that have the mandate to install all the different components of the machine. The scope of this contribution is to describe the current status of the undergoing studies, together with the applied methodology and the definition of the testing apparatuses.

The ISIS-II Neutron and Muon Source, the proposed successor to the ISIS Neutron and Muon Source at the Rutherford Appleton Laboratory, UK, presents a unique opportunity to integrate environmental sustainability practises from its inception. A Life Cycle Assessment (LCA) was performed during the early feasibility and design stage to evaluate the potential environmental impacts across construction, operation, and decommissioning phases, and to identify opportunities for impact reduction. With many accelerator components, elements and systems still in early optioneering stages, numerous assumptions were required to model the facility. This work explores these assumptions and the use of a simplified LCA framework, focusing on bulk material selection, future operational resource management, and strategies for managing non-radioactive and radioactive materials at decommissioning. Updated results of the LCA and identified strategies to minimize and mitigate negative environmental impacts are presented, emphasizing the role of LCAs in embedding sustainability into decision-making for large-scale scientific facilities.

CERN’s upcoming SPS Beam Dump Facility (BDF) will host a production target designed to manage challenging thermal and mechanical conditions while providing the physics output required by the Search for Hidden Particles (SHiP) experiment. It must fully absorb 400 GeV/c protons and dissipate up to 305 kW. The baseline design consists of water-cooled tantalum-alloy clad TZM and tungsten (W) blocks. Challenges for the maintenance and reliability of the baseline design led to the development of alternative concepts. The leading design—a helium-cooled W target—optimizes thermal management and structural integrity while simplifying the manufacturing and improving its physics performance for the SHiP experiment. The experimental validation of this concept will be via testing multiple prototypes in an existing slow beam extraction test bench at CERN’s North Area. In parallel, extensive R&D is being pursued on: properties of pure W products including hot-rolled plates; manufacturing of seamless blocks; W-W diffusion bonding techniques. This contribution includes an overview of the helium-cooled target design and a summary of the ongoing material characterization, prototyping and beam-tests.

The 13th International Conference on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation (MEDSI 2025) marks the 25th anniversary since the first MEDSI workshop in 2000. This biennial meeting, hosted by MAX IV Laboratory in Lund, Sweden, from September 15–19, 2025, is expected to welcome over 300 delegates and more than 30 industrial exhibitors. MEDSI is the leading forum for advancing engineering in synchrotron and free-electron laser (XFEL) facilities, featuring sessions on precision mechanics, photon delivery, simulation, and core technology developments. MEDSI 2025 will also introduce a special session on neutron source instrumentation, emphasizing collaboration with the European Spallation Source (ESS). The event includes invited and contributed talks, poster sessions, and an industrial exhibition, with all contributions published in the JACoW Proceedings. For more information, visit www.medsi2025.com.

At the core of IFMIF-DONES is placed the Target System. It generates a high-speed liquid lithium jet (15 m/s, 300°C) acting as the target for a 40 MeV, 125 mA deuterium-based linear accelerator, with the primary aim of qualifying fusion-related materials. The design of the Target System has evolved during the last few years addressing key challenges. Managing the 5 MW of power deposited continuously in the target requires a reliable lithium loop supplying liquid lithium in well-defined conditions. The extreme operational conditions, exposed to high irradiation levels (~25 dpa/year), demand also careful selection of materials and regular replacement strategies for critical components, supported by dedicated Remote Handling systems. Current efforts focus on optimizing the design to meet the requirements for its upcoming construction phase. This includes advanced features to facilitate assembly, installation, and long-term operability. Additionally, attention is being paid to the integration of diagnostics. This contribution highlights the recent R&D and engineering solutions aimed at advancing the Target System toward successful construction, commissioning and subsequent operation.

Characterizing the longitudinal bunch profile is crucial for understanding beam dynamics and ensuring optimal accelerator performance. To address these needs, Capacitive Pick-Up type Bunch Shape Monitors (CPU-BSMs) were developed at the Institute for Rare Isotope Science (IRIS). These devices non-destructively measure the longitudinal bunch shapes of non-relativistic, nanosecond-scale ion beam bunches. Initial feasibility tests were conducted at a 30 MeV cyclotron to verify the performance of the CPU-BSMs. Subsequently, in 2024, the CPU-BSMs were employed during Nuclear Data Production System (NPDS) beam commissioning at the Rare Isotope Accelerator complex for ON-line experiments (RAON) to characterize both the longitudinal bunch shapes and the beam energy values. In this presentation, we will report the experimental results obtained using the CPU-BSMs during the NPDS beam commissioning at RAON.

Neutron target for high-intensity operation at J-PARC MLF